Mechanical Seals

Series Meqe800 Are Preset Factory Assembled Cartridge Seals For Use In Agitators , Mixers And Reactor Vessels. The Seals Construction Very Slightly For Top Entry Vessels, Side Entry Vessels And Bottom Entry Vessels. The Seal Are Designed To The Shortest Shaft Length And The Bearings Are Located As Close To The Vessel Body To Minimize The

View Detail

Series Meqe3oob Is Single Coil Spring Seal Developed For Light Contamination, Dirty Media And Clogging Type Application. These Type Also Allows It To Fit Onto A Normal Shaft Without Any Balancing Step. The Mechanical Drive Of This Seal Is Realized By Grub Screw Which Lock Onto The Shaft. The Seal Has A Limited Axial Length Compact Shape Which

View Detail

Series Meqe100 Is Single Conical Spring,  Seal With O-ring Provided For Secondary Sealing. Since The Torque Transmission Is Done By The Single Coil Spring The Seals Are Dependent On The Direction Of Rotation, Which Is Seen From The Drive End Of The Shaft Right Handed Spring And Left Handed Springs Are Provided For Clockwise And

View Detail

Our prime concern is to fulfill variegated requirements of the clients, all the time. And, to achieve this objective, we have installed a capacious warehouse. Well documented, secure, and practical, our payment procedures are client friendly. We offer our clients with different online and traditional options to make payments and ensure they are

View Detail

Eries Meqe502 Seals Specially Designed For High Temperature Application And Suitable For High Start – Up Toque Since The Bellows Unit Is Independent Of Torque Transmission. Graf Oil Is Secondary Member Having Excellent Temperature Rang Up To 4000c . Shrunk Fit Seal Face Design Minimize Face Distortion Restricting Leakage And Wear Rate To

View Detail

Microtech Engineering  Mechanical Seals Are Multi Spring, Pusher Type Balanced Seals Suiting High Pressure Application. The Seals Are Compact In Design Suiting All Type Of Rotating Equipments – Pumps And Mixers. Drive Lugs In The Retainer Will Provide Torque Transmission And Reduce Slippage On Shaft And Sleeve . A Snap Ring Holds All

View Detail

Series Meqe202 & Meqe203 Are External Mounted Seal Designed For Extremely Corrosive Application Such As Acids, Salts, Organic Compounds And Reducing Agents. All Materials Coming In Contact With The Liquid Are Made Of Chemically Inert Material. Metallic Components Are Isolated From The Liquid.

Series Meqe202 :

View Detail

Series Meqe200 Is Single Coil Spring Seal With Rubber Bellow Mainly For Use In Waste Water Treatment Plants In The Sewage Application . The Rubber Bellow Protects The Shaft / Sleeve From Fretting. The Bellows Is Not Subjected To Any  For Signal Stress. Torque Transmission Is Through The Spring And Spring  Holder. Self Aligning

View Detail